NC Series Surface Grinder

Request to Call Back Send Inquiry

NC Series Surface Grinder Price And Quantity

Model	Parameter	UOM	ISG-3A-1224-PHD	ISG-3A-1624-PHD	ISG-3A-1632-PHD
Machining range	Grinding length x Width	mm (inch)	300x600 (12x24 inch)	400x600 (16x24 inch	400x800 (16x32 inch)
	Distance between table and spindle center (max)	mm (inch)	450 (18 inch)	500 (20 inch)	500 (20 inch)
	Working surface	mm (inch)	300x600 (12x24 inch)	400x600 (16x24 inch	400x800 (16x32 inch)
Table	Max longitudinal movement	mm (inch)	650 (26 inch)	650 (26 inch)	850 (34 inch)
	Max cross movement	mm (inch)	325 (13 inch)	425 (17 inch)	425 (17 inch)
Longitudinal movement	Max table speed	m/min	5-25
Cross movement	Auto cross feed at each table reversal	mm/ stroke	0.25-6
		inch/stroke	(0.0009 -0.2 inch)
	Manual feed rate/ turn	mm(inch)	5 (0.2 inch)
	Least count of head wheel	mm(inch)	0.05 (0.0012 inch)
Vertical movement	Manual feed rate/ turn	mm(inch)	1 (0.05 inch)
	Least count of head wheel	mm(inch)	0.01 (0.0003 inch)
	Power elevation	mm/min	100 (4 inch)
		inch/min
Grinding wheel	Diameter xThickness x Bore	mm	350x40x127
		inch
Motors	Speed	rpm	2800
	Grinding spindle	hp(kw)	3 (2.25)
	Vertical up down	hp(kw)	0.5 (0.37)
	Cross feed	hp(kw)	0.5 (0.37)
	Coolant pump	hp(kw)	0.12 (0.1)
Hydraulic system	Working pressure	kg/cm2	20
		lb/cm2	210
	Power of hydraulic pump motor	hp(kw)	2 (1.5)
	Tank capacity	ltrs.	100